| If Skype has been chosen, below will be shown: |
|
|
|
After the Skype isn't running, the software would show "Skype
is not running."
If the Skype is running, you will see this alert: |
|
|
|
In order to make the software to work with Skype, choose
"Allow this program to use Skype"
or "Allow this program to use Skype, but
ask again in the future", and click OK.
After running Skype, if the Skype isn't active on the screen, press
any key on the USB phone(such
as 0-9 , * , #), Skype will come to the foreground and the pressed
key will be sent to Skype at the same time. |
|
|
|
The keys on the USB phone:
"#"?You
can switch from the page of [Start]?[Contacts]?[Dial]?[Call List]
"0-9"?Press the key
of "0-9", you can input the telephone number you want
to dial.
Dial key:
When the contact is selected, pressing the green key
will call the contact.
If there are no contacts, pressing the green key will call
the SkypeOut number dialed.
If there is an icoming call, pressing the # key will switch to the active
page. Pressing the green key will accept the call.
Hangup key:
Pressing the "# " key to switch to the active page first
and then pressing the red key will hang up the call.
|
|
|
