Mac OS X User Guide for P1K Skype Phone

1. Download & Install SkyMacMate Driver
2. Using the Keypad
3. Dialing SkypeOut Phone Numbers
4. Speed-Dialing Skype Contacts
5. Call Hold & Switching
6. Audio Settings

Installation

1. Start Skype and log in to a Skype account
   
   
2. Connect the P1K Skype Phone to a USB port on your Mac
   
   
3. Download SkyMACMate software here: SkyMACMate version 1.0.0.12 zip
   (Note: This Mac OS X driver is not available on the CD-ROM)
   
   
4. Double click the SkyMACMate 1.0.0.12.dmg to install, then drag the SkyMACMate icon into the Applications folder.
   
   
5. Open SkyMACMate from your Applications folder
   
   
6. When you first run SkyMACMate, you will be prompted that "Another program wants to use Skype". Select "Allow this program to use Skype" and click OK.

When SkyMACMate is running, you will see its green phone icon in the dock:

Using the Keypad

Scroll up and down within selected Skype tab (adjust volume during call) Place or answer call 0-9 Dial SkypeOut phone number or speed-dial key sequence Begin SkypeOut dialing Power Light < > Scroll across Skype tabs End call or refuse incoming call C: Clear/backspace dialed numbers (Toggles mute during a call) Cycle through ring tones

Dialing SkypeOut Phone Numbers

 

You can dial any regular phone number (SkypeOut) from the keypad using the following format:

 

00 + country code + area code + phone number +

For example, a phone number in the United States would be dialed:

00 1 310 555 1212 then

 

00	Tells Skype you are making a SkypeOut call
1	Country Code
310	Area Code
555 1212	Phone Number
	Sends the phone number to Skype and places the call

Speed-Dial a Skype Contact (Mac)

 

You can dial any of your Skype Contacts directly from the phone's keypad using a speed-dial key sequence.

 

First, in Skype you need to rename the Skype Contact so that it begins with a two digit number. For example, Skype contact "Nastassia" is renamed "12 Nastassia".

 

Likewise, change any other Skype Contacts' names to begin with unique two digit numbers.

 

Then when you want to call a Skype Contact from your phone's keypad, just dial the two digit number you have assigned to that Contact, and press to place the call.

 

For example to call "12 Nastassia", dial: 12 then press

 

Put a Call on Hold

To put a call on hold, press the key. You can resume the call by pressing the key again. To make a call while you have a call in progress:

1. In Skype window, select a contact in your contact list or call history
   
2. From Skype window, start a call with the new contact. The current call is automatically put on hold
   
3. From the P1K Skype Phone's keypad, use the RIGHT / LEFT keys to toggle between the two calls. The current call is placed on hold and the call on hold is resumed
   
4. End/hang-up each call normally, press key

Skype Audio Device Settings for Mac

In Skype --> Preferences --> Audio, select "USB Audio Device" as the Audio output, Audio input and Ringing:

In Mac System Preferences --> Sound --> Input and Output, use your preferred system audio device, for example, "Internal Speakers".

Adjust the speaker and microphone volume using the SkyMacMate control window (double-click SkyMacMate icon in the dock to bring the control window into view).

USB Skype Phone with LCD $18.95